OTC 4748 Belt Tension Gauge for Motorcycle Secondary Drive Belts

OTC's Belt Tension Gauge is an easy to use and read tool that allows for accurate belt tension to be set after belt replacement, adjustment, or wheel service. Use on secondary drive belts with a 10 lb. spec. Instructions: 1. Position the small O-ring over the 10 lb mark. 2. Position the U-shaped belt cradle against the bottom of the belt at a 90 degree angle and locate the large O-ring to a reference point, record reading. 3. Push upward on the rubber bumper until the small O-ring touches the bottom of the tool body. Re-align the large O-ring to the reference point; difference in the reading is the belt deflection. Refer to service manual for specifications. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

• Easy to use and read
• Tool allows for accurate belt tension to be set
• Use after belt replacement adjustment or wheel service
• Use on secondary drive belts with 10 pounds specification